Produkty dla z kołnierzem (533)

Ratchet elements are used to connect two components together in any angular position with a positive fit. The ratchet elements with internal toothing (Forms A–D) can be combined with the ratchet elements with external toothing (Forms E–H) in any way depending on the application and installation possibilities. The springs mean that a new angular position can be quickly implemented. Reference:07820

100% Acrylic

mäntel

100 % Acryl

Completely mounted multi-clamping stations with integrated UNI lock Ø138 mm mounting clamps. The clamping stations are secured to the machine table directly or with clamps. Common bore patterns are pre-centred on the rear side for mounting. Clamping stations can be aligned via the 14H7 reference holes. The clamping stations are actuated via a central pneumatic connection. The high clamping forces are generated by the integrated spring package (the unit clamps in the de-pressurized state). The release process occurs pneumatically. The following retaining forces are possible with the UNI lock clamping bolt in conjunction with mounting screws M10, M12, M16: Retaining force (M10) 35,000N/module Retaining force (M12) 50,000N/module Retaining force (M16) 75,000N/module

Nuestros productos están elaborados con algodón orgánico y materiales reciclables. Se utilizan las telas solicitadas por el cliente. Producimos todo tipo de artículos textiles. ¡Tú diseñas, nosotros hacemos! Aceptamos pedidos de nuevas empresas y empresas existentes.

Housing steel. Cage plastic. Balls steel. Note The linear ball bearings correspond to series 3 of ISO 10285. With doublesided seal. The linear ball bearings have a plastic cage which results in quiet and outstanding running properties. With flange for direct mounting on the housing. Linear ball bearings with doublesided seal should be greased before installation. The specified load ratings apply with the use of hardened and ground shafts. Precision guide shafts 21595. Fastening screws 07160. Reference:21518 Shaft:h6 Housing:H7 Temperature range:-20 °C to +80 °C

The easy operability and rapid adjustment using a scale means that the clamping jaws can be quickly and surely adapted to new workpieces The workpiece is always centred through the systematic construction of the 5-axis compact clamping system. The optimal accessibility to the workpiece allows short, standard tooling to be used. Tooling costs are significantly reduced. Positive down force by a clamping depth of >5 mm. Clamping widths of 20 mm to 320 mm are possible. Assembly: The 5-axis clamping system compact can be mounted on T-slot tables, grid systems or, using an adapter flange on conventional zero-point clamping systems. Accessory: Seating ledge 41345 Jaw plates 41320 Pendulum jaws 41325 Centre jaws 41335 Coupling for cross-clamping 41365 Order the seating ledges and jaw plates with pins separately. Reference:41300

COSTUMES

77% Acryl 23% Polyester

Form A: Tempered and electro zinc-plated. Form B: Tempered and electro zinc-plated. Complete with DIN 787 screw for T-slots, DIN 6340 washer and DIN 6330B nut. Form C: Tempered and electro zinc-plated. Complete with DIN 6379 stud, DIN 6340 washer and DIN 6330B nut. Note: These clamp strap assemblies can be quickly and infinitely adapted to the clamping situation. The clamp straps have different heel types both sides enabling the best end to be selected depending on the specific application. These extremely versatile clamp straps are suitable for use by metal cutting or non-cutting machining and also for press and injection-moulding applications. Reference:04203 Material:Steel

I nostri prodotti sono realizzati con cotone organico e materiali riciclabili, e possiamo utilizzare i tessuti richiesti dai clienti. Produciamo articoli tessili di ogni tipo. Voi disegnate, noi realizziamo! Accettiamo ordini da aziende nuove e già esistenti.

Lavakaulukset, joissa on yksi tai kaksi elementtiä

Scarpe Collar è un accessorio di alta qualità per la passeggiata del nostro animale domestico, dal design confortevole e molto morbido al tatto. Si distingue per la sua bellissima stampa Scarpe. Disponibile nella taglia da 28 a 80 cm di lunghezza È realizzato in pelle bovina estremamente morbida e di alta qualità, che offre al tuo animale domestico un grande comfort. Inoltre è cucito con filo per una maggiore resistenza. Nel frattempo, la fibbia e il picchetto sono realizzati in un materiale altamente solido che offre la perfetta vestibilità e sicurezza durante la corsa. VANTAGGIO: Realizzato con materiale in pelle bovina molto morbido e di alta qualità. Altamente resistente e durevole. Ha una fibbia e un gancio che fornisce la perfetta vestibilità. USI E SPECIFICHE: A disposizione. colore tessile TAGLIE: Larghezza 2 cm – Misure 28, 30, 35 e 40 cm Lunghezza Larghezza 3 cm – Misure 40, 45, 50 e 55 cm Lunghezza Larghezza 4cm - Taglie 55,60,65,70 e 75cm Lunghezza

COAT

I nostri prodotti sono realizzati con cotone organico e materiali riciclabili, e possiamo utilizzare i tessuti richiesti dai clienti. Produciamo articoli tessili di ogni tipo. Voi disegnate, noi realizziamo! Accettiamo ordini da aziende nuove e già esistenti.

Design and construction This Schulz ball caster / ball transfer unit consists of a casing, a top cover and a bearing cap as solid turned parts, a bearing ball and several support balls. Dimensions The spacing is calculated by dividing the shortest edge length of the object to be transported by 3.5. Casing:Steel galvanized, Stainless Steel (tempered) Top cover:Steel galvanized, Stainless Steel Support balls:tool steel (tempered), stainless steel (tempered) Bearing ball:tool steel (tempered), stainless steel (tempered), plastic Temperature range:from -30°C to +100°C Conveyance velocity:up to 2,0 m/s Dynamic load rating:up to max. 2.000 kg

Nuestros productos están elaborados con algodón orgánico y materiales reciclables. Se utilizan las telas solicitadas por el cliente. Producimos todo tipo de artículos textiles. ¡Tú diseñas, nosotros hacemos! Aceptamos pedidos de nuevas empresas y empresas existentes.

Nuestros productos están elaborados con algodón orgánico y materiales reciclables. Se utilizan las telas solicitadas por el cliente. Producimos todo tipo de artículos textiles. ¡Tú diseñas, nosotros hacemos! Aceptamos pedidos de nuevas empresas y empresas existentes.

Grip black or traffic red RAL3020. Thrust washer black. Hinge pin bright. Stud and washer trivalent blue passivated or bright stainless steel. Note: Adjustable cam levers are used if the position of the lever relative to the axis of tension only permits one specific position (interference circle). The exact position of the lever is adjusted using a screwdriver on the fine thread setscrew. Plastics are subject to creeping under load (retardation), this can cause reduced clamping force. Drawing reference: 1) setscrew for fine adjustment of lever Reference:04233

Nuestros productos están elaborados con algodón orgánico y materiales reciclables. Se utilizan las telas solicitadas por el cliente. Producimos todo tipo de artículos textiles. ¡Tú diseñas, nosotros hacemos! Aceptamos pedidos de nuevas empresas y empresas existentes.

Design and construction This Schulz ball caster / ball transfer unit consists of a casing and top cover as solid turned parts, a bearing ball and several support balls. Dimensions The spacing is calculated by dividing the shortest edge length of the object to be transported by 3.5. Casing:tempered, galvanised steel, tempered stainless steel Lid:galvanised steel, Stainless steel Ball cup:tempered steel, tempered stainless steel Support balls:Tool steel (tempered), Stainless steel (tempered), Plastic Bearing ball:tool steel (tempered), stainless steel (tempered), plastic Temperature range:from -30°C to +100°C (up to +30°C with plastic bearing ball) Conveyance velocity:up to 1.5 m/s Dynamic load rating:up to max. 1.500 kg

1% ELASTAN 24% Polyester 75% Acrylic

Outer jacket stainless steel. Cage stainless steel. Balls stainless steel. Note The linear ball bearings correspond to series 3 of ISO 10285. With doublesided seals and a stainless steel cage. The bearing is secured with DIN 471/472 circlips. Linear ball bearings with doublesided seals should be greased before installation. The specified load ratings apply with the use of hardened and ground shafts. Reference:21505-01 Shaft:h6 Housing:H7

48% Baumwolle 52% Acryl

Other threads, screw lengths and special versions. Dimensions “H1” and “A” available in other lengths at extra charge. Reference:06400 Version:Black oxidised

Workpieces are clamped and released by compressed air. The possible clamping diameter is from 16 to 20 mm. Material: Body, stainless steel. Seal, NBR. Version: Stainless steel bright. Note for ordering: Cylinder head screws M4X35 for fastening from below are included with delivery. Cylinder head screws with low head M5 for fastening from above are not included with delivery. Note: Installed dimensions for plate thickness 6 mm. The stated retaining forces are related to an operating pressure of 0.5 Mpa and a surface quality of Ra 1.6 µm. Repeat accuracy in this case is ±0.2 mm. Reference:03161-20

Nuestros productos están elaborados con algodón orgánico y materiales reciclables. Se utilizan las telas solicitadas por el cliente. Producimos todo tipo de artículos textiles. ¡Tú diseñas, nosotros hacemos! Aceptamos pedidos de nuevas empresas y empresas existentes.

Swing clamps are used where the clamping points must be free when the workpiece is loaded or removed. Reference:04364

The collet is opened by applying compressed air to the "open" port. The collet is closed (for clamping) by applying compressed air to the "close" port. The pneumatic connections can be screwed on either from below or from the side. If the air is connected from below, the side ports must be closed. Machining the collet for external clamping: The negative form of the workpiece to be clamped is machined into the collet. Free-form and asymmetrical contours are possible. Different workpieces can be clamped quickly and securely by simply exchanging the collet. The collet can be milled down to height H2. This enables multiple workpiece contours to be machined into one collet. Repeat accuracy for workpiece: +/-0.03 Repeat accuracy after replacing the collet +/- 0.02 The collet radial clamping travel is 0.15 mm per clamping segment. To prevent damage the collet should not be tightened without a workpiece or clamping ring in place. The operating air pressure should lay between 0.45 - 0.55 MPa. Reference:03178-10